Assist in products selection


Charging device outlet for charging electric vehicles (EVs) with alternating current (AC), compatible with type 2 charging device plugs for installation in electric vehicle charging stations (EVSE)


Products type

Only 4 products can be compared each time. Please select the products you want to replace.

    • Overview
    • Technical data
    • Accessories
    • Certification
    • Business data
    • Download

    Product certification

    Product advantages

    ☑All Degson's vehicle sockets and charging pile power sockets adopt a unified design
    ☑The surface of power and signal contacts are silver-plated
    ☑Certified to IATF 16949:2016
    ☑Ergonomic and easy to operate
    1. 3D model
    2. Environmental conditions
    3. Electrical characteristics
    4. Mechanical properties
    5. Installation
    6. Marking material
    7. Locking device
    8. Temperature Sensor
    9. Environmental Product Compliance
    10. Cable
    11. Dimension

    3D model

    Environmental conditions

    Maximum altitude5000m(Above sea level )
    Ambient temperature (operation) - 30 °C ~ 50 °C
    Ambient temperature (storage / transport) - 40 °C ~ 80 °C
    IP classIP54(protection cover)

    Electrical characteristics

    Maximum charge power8KW
    Phase 1
    Power pin quantity3
    Rated current of high-power contacts32
    Power contact rated voltage 250
    Quantity of signal contacts 2
    Signal contact rated current 2
    Signal contact rated voltage 30
    Signal transmission type Pulse width adjustment
    Connection method precautions Screw connection
    Temperature measurementNTC

    Mechanical properties

    Insertion/pullout cycle10000
    Insertion force< 100N
    Pull out force < 100N


    Available installation locationRear board installation
    Limit of the installation location Only allow 0 to 90 degrees frontal tilt
    Lock actuator installation location Top center, can only be installed at the rear
    Mounting hole diameter 6.00 mm (ø)

    Marking material

    Shell colorblack
    Customization basis Provided according to customer requirements
    Contact surface materialAg
    Marking material Plastic

    Locking device

    Lock type Secured by locking device after insertion

    Temperature Sensor

    Sensor typeNTC
    Temperature range _30 °C ... 200 °C

    Environmental Product Compliance

    China RoHSconform


    Cable composition 3*6mm²+2*0.75mm²


    Depth 101mm
    Hole diameter 58 mm x 61 mm
    Wire length 0m
    0.4 m (Lock the actuator cable )
    Height 127.3mm

    TUV parameters

    Overvoltage category/Degree of pollution III/3
    Rated voltage 250V
    Rated current 32A
    IP class IP54
    Order number 22070000010
    Packing unit 5pcs/box
    Minimum order quantity 5
    Products weight (without packaging) 13.65
    FEAC-S-032A-P1-03-0.0M-25AH.stp Download
    CAD Data
    FEAC-S-032A-P1-03-0.0M-25AH.dxf Download
    FEAC-S-032A-P1-03-0.0M-25A(H).pdf Download

    Similar products

    Online consultation